© 2017 High Country Ag Marketing - (800) 777-9960 | by Montana Image

GATE SOLUTIONS

PIVOT GATES

High Country Ag. Marketing Inc. introduces the Irri-Gate. This gate is designed for rotational grazing using irrigation systems. It allows pivot towers to move through fence lines while maintaining a livestock secure fence.

Center Pivot Gate

The Irri-Gate consists of two 2 foot 10 gauge stainless steel gate rods. Each has an integral coil spring that insures that whether the gate is pushed open or down it will always return to center, at the same time it reduces the pressure exerted against the post and the pivot tower.

Install a minimum of 30 inches from the ground.

Drive-Thru Gates

 

The best drive through gate you will ever own! Bumping the gate allows it to open to 130 degrees without rubbing the vehicle

Drive-Thru Gate
  • The patented pressure release mechanism allows the gate to "pop" open faster than you bump into it.

  • The electrically conductive rubber bumper sleeve has a cushioning effect while still maintaining a completely electrified gate.

  • The electrically conductive fiberglass extension can be adjusted to give the gate an overall length of 10' to 16.5' simply by pulling it out with pliers or pushing it in. It is also very flexible and durable.

  • The "Forever Flex" tip made of soft PVC plastic is molded to the fiberglass rod. It has soft fingers that are designed to push themselves out of crevices and snags if they make contact.

  • The patented "Wind Gust Damper" locks the gate shut quickly once a vehicle is through. It also keeps the gate from swaying in strong wind.

  • The gate is insulated from the post with an insulator back. The gate is easily installed using the two lag bolts and special insulator bushings supplied. Also supplied are useful hints and tips on the gate and electric fencing.

  • Designed to give many seasons of dependable use.

  • Guaranteed for 3 years against breakage.

No More Climbing In & Out